TEROSON WX 350 - DRUM 60 L
TEROSON WX 350 is a solvent containing anticorrosive agent based on waxes, polymers and anticorrosive additives, which is primarily used for cavity conservation of rust-endangered cavities of motor vehicles.
The material is a liquid wax solution.
TEROSON WX 350 infiltrates and displaces humidity because the wax characteristic acts water repellent.
The product contains a high content of rust inhibitors which optimize the corrosion protection.
TEROSON WX 350 atomizes to a fine fog during spraying and has good penetration characteristics.
This leads to optimum protection even of those areas which are difficult to reach and also between narrow sheet metal tolerances.
It penetrates well into the gaps to be protected (e.g. welding seams), but does not run off significantly from lower seams.
The material may also be applied at temperatures below 15°C, but penetration is improved when product and car body have normal room temperature.
After complete drying TEROSON WX 350 forms a plastic, waxlike, slightly tacky, water-repellent film with a beige transparent colour.
The protective film changes the surface tension causing water to drip off.
Applications :
TEROSON WX 350 is primarily used in garages for spraying cavities in motor vehicle bodies in addition to the existing cavity conservation applied to new cars, for follow-up treatment after 2 - 3 years and after an accident damage repair.
TEROSON WX 350 can also be used for care and maintenance of the entire underbody: it protects from rust, has a brightening effect on all parts looking shabby or slightly rusty.
In this case spray the underbody just lightly.
TEROSON WX 350 is also fitted removable protection of bare metal parts, e.g. when shipping on boats.
Connexion
