TEROSON MS 9320 OCHRE - CARTRIDGE 300 ML
TEROSON MS 9320 is a sprayable sealant based on MS-Polymer, which cures by reaction with humidity to an elastic, abrasion resistant product.
Characteristics
- The skin formation and curing times are dependent on humidity and temperature
- By increasing the temperature and moisture these times can be reduced
- Sag resistant
- Sprayable and brushable
- Repaired seams have the same appearance as the original
- Good paint compability, also to alcohol containing paints
- Good adhesion to metals, primers and top coats
- Free of solvents, isocyanates, silicones and PVC
- UV resistant
- High ageing resistance
- Spotweldable if not cured
- Fast through curing
Application
Teroson MS 9320 is recommended for the sealing of automobile seams in the repair shop in the areas of :
- engine compartment
- boot
- passenger cabin
Technical characteristics
- Colour : ocher
- Odour : characteristic
- Consistancy : paste
- Density : approx. 1,5 g/cm³
- Skin formation time : approx. 10 min*
- Curing mechanism : humidity curing
- Cure rate : approx. 3 mm/24 h*
- Shore-A-hardness (DIN 53505): approx. 60
- Sag resistance : very good
- Application temperature : +15°C to +35°C
- Paint compatibility : can be painted wet-in-wet with car repair paint
- Adhesion : good adhesion to sheet metal (in degreased untreated, galvanized, EC or top-coat painted condition, including metallic paints), PVC underbody coating, polyester, PP/EPDM (trials are recommended)
- In service temperature range : -30°C to 90°C
- Short exposure (up to 3 h) : +130°C
* DIN 50014 standard climate : 23°C, 50% relative air humidity
|
Connexion
