Err

livraison
Contact
Paiement Livraison rapide Contactez-nous
Inscrivez-vous notre Newsletter

TEROSON PU 9225 UF ME IN 50 ML CARTRIDGE

(Code: 02-20135-01)

Data Sheet
39.60 €
Add to cart
TEROSON PU 9225 UF ME IN 50 ML CARTRIDGE

TEROSON PU 9225 UF ME - CARTRIDGE 50 ML



Teroson PU 9225 UF ME is an ultra fast polyurethane based two-component adhesive which cures at room temperature.



Characteristics
For accelerated curing it is recommended to increase the temperature up to 60 to 70 C.
The product is supplied in a convenient twin cartridge and is rapid-curing.
Teroson PU 9225 UF ME can be painted with normal commercial car repair refinishing paints.
When applying Teroson PU 9225 UF ME to plastics the use of an approved Henkel primer is absolutely necessary.

Application
Teroson PU 9225 UF ME is used for ultrafast repair of trim and body parts, made of PP / EPDM, SMC, PC, PA, ABS, and PUR , e.g. repair and reconstruction of head lamp clips (where legally permitted due to national regulations).


Technical characteristics
Partie A
  • Colour : grey
  • Density : approx. 1,6 g/cm
Partie B
  • Colour : grey
  • Density : approx. 1,3 g/cm
  • Mixing ratio A:B by volume : 1:1
Mélange (Parties A+B)
  • Colour : grey
  • Potlife (25g, 23C) : < 1 min
  • Tack-free time (23C, 50% HR) : approx. 2 min
  • Curing time at 23C : approx. 1,5 h
        Layer thickness : 3 mm
  • Shore A hardness : approx. 95
  • Grindability : good
  • Paintability : good